Graffiti Barrier
Krylon® Industrial’s GRAFFITI BARRIER is a 1K, siloxane clear coat which creates a non-stick surface protecting buildings and structures from graffiti penetrating and adhering to the surface and allows for simple removal with power washing. This unique technology is up to 50% more efficient at combating graffiti than traditional methods from a cost perspective. GRAFFITI BARRIER is ready to use and non-sacrificial; therefore it stands up to countless power washes without reapplying the coating every time.
- Clear coat barrier to prevent graffiti from penetrating the substrate
- Graffiti is EASILY removed with power washing
- UV resistant
- Interior/Exterior use
Power wash with 3000 psi pressure washer having a 15°tip at 2-3 inches away from the surface. Graffiti can also be removed by solvent wiping or acceptable graffiti removers. No signs of graffiti left after clean up; no visible signs of streaking, cracking, pinholing, discoloration or other coating degradation. Coating is sensitive to water. The following is a guide. Changes in pressures and tip sizes may be needed for proper spray characteristics. Always purge spray equipment before use with listed reducer. Any reduction must be compliant with existing VOC regulations and compatible with the existing environmental and application conditions. BRUSH/ROLL: Brush: Natural Bristle; Cover: 3/8" – 1/2” woven with solvent resistant core. NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance. AIRLESS SPRAY: Pressure: 3200-3600 psi Hose: 3/8" ID Tip: .013" - .017" Filter: 60 mesh When using spray application, use a 50% overlap with each pass of the gun to avoid holidays, bare areas and pinholes. Cross spraying at a right angle is recommended. REDUCTION: No thinning suggested for brush or roll. For airless spray, if necessary reduce up to 5% by volume. Excessive reduction of material can affect film build, appearance, adhesion and other performance properties. CLEAN UP: Clean spills, spatters and tools immediately with Mineral Spirits. Follow manufacturer’s safety recommendations when using any solvent.
The colors that appear on screen may not match actual color.
